Serinus 40 User Manual 2.2
6.5 Parts List
Below is a list of the replaceable parts of the Serinus 40. Some of these parts will not need replacing
and others are consumables for preventative maintenance. See below for information on yearly
consumable kits available from Ecotech.
Table 8 – Spare parts list
Tube, side-on, photomultiplier
Heater and thermistor assembly
PCA for LCD and Keypad (Original front panel design)
PCA for LCD and Keypad (Newer Backlit keypad design)
PCA, controller (programmed with ID number)
Filter, optical, reaction cell
Heater/thermocouple assembly NOx converter
Heater/thermistor assembly (reaction cell, manifold)
Ozone generator and housing assembly
Retrofit/refurbishment kit, Ozone generator (confirm with Ecotech which
version you have)
Calibration valve manifold assembly
Cable, PMT power supply NOx, gas analyser
Cooler, thermistor assembly
Dryer assembly, permapure
Extraction tool, orifice and sintered filter with O-ring groove
PCA pressure sensor assembly
Fitting, Kynar, elbow 1/8 NPT - 1/8 barb (3 required)
Fitting, Kynar, male connector 1/8 NPT - 1/8 barb (2 required)
Male elbow, tapered threads, 1/8 T - 1/8 NPT, SS
Sintered filter, 5 micron, consumable
To Next Page
Loading...
