6. Service
6.1 Pneumatic Diagram
Figure 51 - Pneumatic diagram
6.2 Maintenance Tools
To perform general maintenance on the Serinus 40 the user may require the following equipment:
Digital multimeter (DMM)
Computer or remote data terminal and connection cable for RS232 or USB communication
Pressure transducer (absolute) and connection tubing
Flow meter (1 slpm nominal)
Minifit extraction tool PN: T030001
Orifice removal tool PN: H010046
Assortment of 1/4” and 1/8” tubing and fittings
Zero air source
Span gas source
To Next Page
Loading...
