Serinus 40 User Manual 2.2
3.4 Main Display
The main display is composed of seven parts: the readings (1), the error/status line (2), the
instrument activity line (3), selection buttons (4), the time/date (5), the concentration units (6) and
USB status (7).
Figure 7 – Main screen display
Readings (1)
Displays the concentration being measured in real-time. The display can be configured to show just
the instantaneous data or the instantaneous and average data (refer to Section 3.5.9).
Error/Status Line (2)
The error/status line provides users with information on any problems the instrument may have. It
displays the highest priority error or status condition contained in the Status Menu (refer to Section
3.5.4).
Instrument Activity (3)
This line shows what function the instrument is currently performing. Generally, it will show three
groups of actions: Warm-up, Measurement or Calibration.
Selection Buttons (4)
These buttons are used on the main screen to enter one of two menus. The Quick Menu (refer to
Section 3.5.1) contains all information and features necessary for scheduled maintenance. The Main
Menu (refer to Section 3.5.2) contains all information and fields available to users and is generally
only used during initial set-up and diagnostics.
Time and Date (5)
The time and date are displayed in between the menu buttons at the bottom of the screen.
Concentration Units (6)
The current instrument units are displayed in the bottom right hand corner of the display.
To Next Page
Loading...
