Ecotech Serinus 40 - Manual Revision History

Serinus 40 User Manual 2.2
Page 16
Manual Revision History
Manual PN: M010028
Current revision: 2.2
Date released: 10 December 2013
Description: User Manual for the Serinus 40 Oxides of Nitrogen Analyser
This manual is the full user manual for the Serinus 40 Oxides of Nitrogen Analyser. This manual
contains all relevant information on theory, specifications, installation, operation, maintenance and
calibration. Any information that cannot be found within this manual can be obtained by contacting
Ecotech.
Table 1 – Manual revision history
Edition
Date
Summary
Pages
1.0
September 2008
Initial release
all
1.1
February 2009
General updates, specifications and menu updates
all
1.2
March 2009
New maintenance procedures
Updated analyser setup
Small corrections
New menu items added
40, 51
12
Various
19-31
1.3
June 2009
Small correction
Section 4.5 and 4.6 swapped
Updated exhaust description
Various
37-38
11
1.4
November 2009
Small correction
Included Serinus downloader info
Included advanced protocol
Various
From 55
129
1.5
February 2010
Minor changes section 3.5.14
Updated parts list
51
110
1.6
September 2010
CE conformity added
Pressurised span/zero added
Updates to rack mount option
Updates to Serinus downloader
Update to 25 pin I/O network communications
12
123
58
60
64
1.7
January 2011
High level option added
Updates to power specifications/battery
Updates to serial communications
Updated maintenance kit
128
Various
56
110