4.6.5 Download
Downloads logged data from the USB stick inside the analyser. All data logged by the analyser to the
USB stick over the period of time specified will be collected. Due to the slow connection speed of
Bluetooth, this should only be used for relatively short sections of data. Downloading 1 days’ worth
of 1 minute data is likely to take a couple of minutes.
Options Menu
Generates a filename based on the start and end date/time specified, saves the
downloaded data in the location specified in preferences, and then asks to send
the saved comma separated text file (.csv) as an attachment to an email. Note
that this file format does not include the parameter headings, just the values.
Sends an email with the parameter data in the body of the email, formatted as
displayed (this includes the parameter name and the values).
Graphs the data that has been downloaded. The user is prompted to select which
parameters to plot based on the parameters that were being logged (refer to
Figure 35).
Figure 35 – Plot of downloaded data
4.6.6 Get Parameters
Downloads a list of parameters and corresponding values directly from the analyser. This list of
parameters is a snap shot of the current instrument state, and is very helpful in diagnosing any
problems with the analyser.
To Next Page
Loading...
