Ecotech Serinus 40 - Calibration; Power; Operating Conditions

Serinus 40 User Manual 2.2
Page 20
Response Time
15 seconds to 90%.
Sample Flow Rate
0.3 SLPM (0.6 SLPM total flow for two channels).
1.2.3 Calibration
Zero Drift
Temperature dependant: 0.1 ppb per °C.
24 hours: < 0.4 ppb
7 days: < 1.0 ppb
Span Drift
Temperature dependant: 0.1% per °C
7 days: < 1.0% of reading
1.2.4 Power
Operating Voltage
99 to 132 VAC (57-63 Hz) or via switch 198 to 264 VAC (47 to 53 Hz).
U.S. EPA designated range: 105 to 125 VAC, 60 Hz.
Power Consumption
265 VA max. (typical at start-up).
190 VA after warm-up.
Fuse Rating
20x5 mm, T 250V, 5 A (slow blow).
1.2.5 Operating Conditions
Ambient Temperature Range
0 °C to 40 °C (32 °F to 104 °F).
U.S. EPA designated range: 20 °C to 30 °C.
Sample Pressure Dependence
5% change in pressure produces less than a 1% change in reading.
Maximum altitude: 3000 m above sea level.