C
HAPTER
20
| 802.1X Security
802.1X Port Settings
– 112 –
■
Force-Authorized – Forces the port to grant access to all clients,
either dot1x-aware or otherwise.
■
Force-Unauthorized – Forces the port to deny access to all
clients, either dot1x-aware or otherwise.
■
No Authentication – Disables 802.1X authentication on the port.
(This is the default setting.)
◆ State — Shows the current status of the 802.1X authentication
process.
WEB INTERFACE
To configure 802.1X port settings:
1. Click Security, 802.1X, 802.1X Port Setting.
2. Select one or more ports to configure.
3. Set the 802.1X Mode to “Authentication.”
4. Click Apply.
Figure 41: 802.1X Port Setting
To Next Page
Loading...
Need help?
General