Edge-Core ECS4310-26T - Defence Engine; Figure 45: Defence Engine Setting

C HAPTER 21 | General Security Settings
Defence Engine
– 117 –
DEFENCE ENGINE
Defence Engine is a advanced feature that can prevent switch’s CPU from
being overwhelmed by flooded packets, such as unknown unicast,
unknown multicast, or broadcast packets. This function can be used to
prevent malicious viruses or worm attacks.
PARAMETERS
The following parameter is displayed on the Defence Engine page:
◆ Defence Engine — Enables or disables the feature. (Default: Enabled)
WEB INTERFACE
To configure Defence Engine settings:
1. Click Security, Defence Engine.
2. Set Defence Engine status to Enabled.
3. Click Apply.
Figure 45: Defence Engine Setting