Operator instructions
A.2 EST2 System Operations Manual
Posting operator instructions
The following pages feature two sets of operator instructions.
The first set of instructions (Figure A-1) outlines the procedures
for operating the fire alarm panel without emergency
communications equipment.
The second set of instructions (Figure A-2) provides the
procedures for operating the fire alarm control panel with
emergency communications equipment.
To post operator instructions:
1. Photocopy the master set of operator instructions.
2. Write down the location of control panel in the space
provided at the top of the form.
3. Frame the operator instructions.
4. Mount the operator instructions next to the control panel.
To Next Page
Loading...
