EDWARDS SYSTEMS TECHNOLOGY EST2 - Page 87

Index
EST2 System Operations Manual Z.1
Z
Index
2
2-CMDN(-C) • 3.3, 3.5–3.8
2-LCD
control switches • 2.4–2.5
function switches • 2.7, 2.16–2.39
keypad • 2.6
LEDs • 2.4
message review switches • 2.5
2-LSRA(-C) • 3.4, 3.5–3.8
2-MIC • 2.42–2.43
2-SANCOM • 3.9–3.10
2-SMDN(-C) • 3.2, 3.5–3.8
2-TEL • 2.44
A
accessing the system status menu • 2.16
ACp1 indication • 2.17
actions
activation of • 2.31
disabling of • 2.29
enabling of • 2.26
restoration of • 2.33
activating system devices/functions. See
under actions; outputs; sequences; smoke
sensitivity levels. See also LED/switch
modules
Active LED, SIGA-MDM • 2.45
addresses, panel • 2.23
alarm silence
2-CMDN(-C) • 3.5
2-LCD • 2.5
2-LSRA(-C) • 3.5
2-SMDN(-C) • 3.5
Alert switch, 2-MIC • 2.43
alerting building occupants. See Alert
switch, 2-MIC; Phone to Alert switch, 2-
MIC
Ann1 indication • 2.17
annunciators, SAN • 3.9–3.18
autoprogramming. See reconfiguring SLCs
B
Bal1 indication • 2.18
Bat1 indication • 2.17
buzzers
2-CMDN(-C). See trouble silence
2-LCD. See local silence
2-LSRA(-C). See trouble silence
2-SMDN(-C). See trouble silence
2-TEL. See Silence Call-In switch
C
canceling commands • 2.41
changing system passwords • 2.22–2.23
checking system status. See under status
screens, 2-LCD
Clip LED, SIGA-MDM • 2.45
Com1 indication • 2.18
communicating with firefighters. See master
handset, 2-TEL
communication classes • 2.23
computers, laptop
disabling of • 2.30
enabling of • 2.27
conditions, trouble • 2.12
control switches, 2-LCD • 2.4–2.5
controls. See under switches
CPU
failure indication • 2.4
restarting of • 2.24
D
date, system • 2.22
devices, disabled • 2.19–2.21
Dia1 indication • 2.17
digital message module. See SIGA-MDM
disabling system functions. See under
actions; laptop computers; mapping;
messages; panel addresses; RS-485
channels; sequences; time controls; zones
displays, 2-LCD
disabled devices/functions • 2.19–2.21
field panel status • 2.18
fire alarm message • 2.8
general status • 2.16
history report • 2.36
loop status • 2.17
reading of • 2.8
relay/LED status • 2.19
sensitivity report • 2.34, 2.35