Edwards iDT-002

Display Unit iDT-002
MT-91E-A01-B
Page 8
INSTALLATION OF THE DISPLAY UNIT IDT
-002
3
Item
Description
Function
10
POWER LED
(Green LED) Illuminates while the power is ON.
That extinguishes while operating with backup power.
NORMAL LED
(Green LED) Illuminates during rated speed operation
(NORMAL OPERATION state)
「FAILURE」LED
(Red LED) Illuminates when any of the abnormalities/errors
occur on the STP pump. The LCD has an error message
simultaneously.
11
Bracket
This is for fixing the display unit iDT-002 to a rack. Refer to
Section 3.7, "Attaching the display unit to a rack”.
Table 2 - iDT-002 front panel function (continued)