4.5.2 Error contents
If an abnormality/error is detected, "Err No.**/**" and the error message contents are displayed
alternately on the lower line of the LCD.
The "**/**" part of the "Err No.**/**" shows "error No. / total number of errors". Thus, a "1/3" would
denote the earliest error of three errors. Press the "UP" or "DOWN" switch to scroll through the LCD
to display the contents of the next or previous error message.
Refer to Section 7.6, "Troubleshooting," in the STP pump Instruction Manual for details of errors.
Figure 12 - Example of error message indication
Note: The TMS temperature is displayed alternately when the TMS is enabled.
To Next Page
Loading...