4.7 Parameter set mode
The following parameters of the STP pump can be set in Parameter Set Mode.
The active functions are depending on the STP pump models. The unavailable items are displayed
as "Unsupported”.
The items that cannot be changed are displayed as 'Unchangeable.'
iXA2206
iXA3306
iXA4506
iX3006
series
Input operation port setting
Second speed option setting
Second damage limit function
setting
Vent Valve Option Setting
Vent Valve Open Speed Setting
Vent Valve Operating Time
Setting
Serial communication timeout
setting
Table 9 - Parameter set mode
*1 The TMS temperature setting cannot be changed on some models in the iXA3307/iXA4507 series.
To Next Page
Loading...