4.6.1 Operation method
Refer to Figure 14 and Figure 15.
1. Press the "SELECT" switch to enter the “Confirmation Mode” while the “Operation Mode” is
displayed.
2. Press the "UP" switch to display the next menu in the same group. Press the "DOWN" switch to
display the previous item in the same group.
3. Press the "SELECT" switch to display the next group.
4. Press the "UP" and "DOWN" switch to confirm the status of the items of the currently selected
group.
5. Press the "SELECT" switch to return to the “Operation Mode” when viewing the Error Records.
Note: When the communication error is detected, the STP pump cannot enter the “Confirmation
Mode”. The STP pump will automatically return to the “Operation Mode” when the
communication error occurs in the “Confirmation Mode”.
Note: When the data cannot be obtained, each menu displays "no data”.
To Next Page
Loading...