Edwards iDT-002

Display Unit iDT-002
MT-91E-A01-B
Page 13
INSTALLATION OF THE DISPLAY UNIT ID
T-002
3
Display unit iDT-002
STP pump
1
Communication cable
2
X5 STP-LINK connector
Figure 6 - Connecting to the STP pump
(STP-iXA3307/iXA4507 series)
CAUTION
Considering maintenance workability, the CN2 for the communication cable does not have a locking
mechanism. When installing the display unit iDT-002, take appropriate measures such as bundling
the cables to prevent falling off.
CAUTION
The connector for a communication cable (refer to Figure 7) on a Display unit iDT-002 is not
waterproof and dust-proof. DO NOT leave a Display unit iDT-002 connected to a pump in an
environment affected by dust and water splashes. That may be a risk that the STP pump gets
broken.
1
2