Edwards iDT-002

Display Unit iDT-002
MT-91E-A01-B
Page 12
INSTALLATION OF THE DISPLAY UNIT IDT
-002
3
3.6.1 Connecting to the STP pump
Connect a display unit iDT-002 to the X5 STP-LINK connector of an STP pump with a
communication cable. The STP pump in Figure 4 and Figure 6 is a typical pump model. Refer to the
STP pump Instruction Manual for the configuration of each STP pump.
Display unit iDT-002
STP pump
1
Communication cable
2
X5 STP-LINK connector
Figure 4 - Connecting to the STP pump
(STP-iS1607/iS2207 series)
Display unit iDT-002
STP pump
1
Communication cable
2
X5 STP-LINK connector
Figure 5 - Connecting to the STP pump
(STP-iXA2206/iXA3306/iXA4506/iX3006 series)
1
2
1
2