Edwards nEXT730 - Page 131

This product has been manufactured under a quality management system certified to ISO 9001:2015
EU Declaration of Conformity
Edwards Ltd
Innovation Drive
Burgess Hill
West Sussex
RH15 9TW
UK
Documentation Officer
Jana Sigmunda 300
Lutín , 78349
Czech Republic
T: +42(0) 580 582 728
documentation@edwardsvacuum.com
The product specified and listed below
 Turbomolecular Pumps with Integrated Frequency Converter
Type Designation
Part Numbers
Description
nEXTa1x f1f2 NW f3f4
a1 = 730 or 930 or 1230
x = blank, D, iD, iiD, H, iH, iiH, Q
f1 = ISO-K or ISO-F or CF
f2 = 100 to 250
f3 = 16, 25 or 40
f4 = blank or INV
B8xxxxxxx
x = A to Z or 0 to 9
a1 = Pumping speed
f1 = Flange type
f2 = High Vacuum flange
f3 = Fore-Vacuum flange
i = Interstage port
ii = 2 Interstage ports
INV = Inverse – Upside Down
D = Standard
H = High Compression
Q = High Throughput
Is in conformity with the relevant requirements of European CE legislation:
2006/42/EC
Machinery directive
Note: The safety objectives of the Low Voltage Directive 2014/35/EU were complied with in accordance
with Annex 1 No. 1.5.1 of this directive.
2014/30/EU
Electromagnetic compatibility (EMC) directive
Class B Emissions, Industrial Immunity
2011/65/EU
Restriction of certain hazardous substances (RoHS) directive
as amended by Delegated Directive (EU) 2015/863
Based on the relevant requirements of harmonised standards:
EN 1012-2:1996 +A1:2009
Compressors and vacuum pumps. Safety requirements. Vacuum pumps
EN 61010-1:2010+A1:2019
Safety requirements for electrical equipment for measurement, control and laboratory
use. General requirements
EN 61326-1:2013
Electrical equipment for measurement, control and laboratory use. EMC requirements.
General requirements
This declaration, based on the requirements of the listed Directives and EN ISO/IEC 17050-1, covers all product
serial numbers from this date on: 2023-07-19
You must retain the signed legal declaration for future reference
This declaration becomes invalid if modifications are made to the product without prior agreement.
P20010287C
Ian Keech – VP Engineering, Scientific Vacuum Division
Burgess Hill
Rene Rose Stueber – General Manager
Product Company Cologne