Edwards STP-iX455 - Display Unit

STP-iX455/iXL455 Series Instruction Manual
10-2
Operation
10.2 Display Unit
The "display unit" operates the STP pump, confirms the pump status or resets various
settings. The display unit iDT-001 is equipped with an LCD and flat panel switches.
The display unit iDT-001 can be used with fixing to the front panel of the power supply
unit iPS-240, or connecting the STP-Link connector.
See the Instruction Manual of the "Display unit iDT-001" for the detailed specification
and operating methods.
STP-Link
BRAKE
ACCEL.
STOP
START
NORMAL FAILURE
POWER
UP
DOWN ENTER
SELECTRESET
65
98.4
132
122.5
Figure 10.1 Display Unit iDT-001