108
Color Profiler Suite Device Linker, including “optimize a device and optimize spot color” links
Color Profiler Suite Integration with Calibrator
The Color Profiler Suite is now directly integrated with Fiery Calibrator so that the user can choose Manage Calibration Sets to create new
profiles using the same wizard they use to create the new calibration set. Just click on “Create New Profile” to create a new profile in the
Printer module.
Color Profiler Suite Integration with Spot-On
The Inspect button in Spot-On launches the Profile Inspector module directly from Command WorkStation. This feature provides a
comparison of the output profile to a spot color group. This comparison represents which spot colors can be printed using the selected
output profile based on the device gamut.
To Next Page
Loading...
