EG4 6000XP User Manual

27
• On Grid EOD Voltage(V): The inverter will stop discharging the battery at this voltage and
will use AC to power loads. When battery voltage is > (EOD Voltage +3V), the inverter will
switch back to battery discharge mode.
• On Grid EOD SOC(%): The inverter will stop discharging the battery at this SOC and will use
AC to power loads. When battery SOC is > (EOD SOC+10%), the inverter will switch back to
battery discharge mode.
7.5 OTHER SETTING
• Batt Volt Sample Disable: Set to Internal, External or Both Available.
• Fan 1 Max Speed(%): This sets cooling fan 1 max. speed. Range is 50-100%.
• Fan 2 Max Speed(%): This sets cooling fan 2 max. speed. Range is 50-100%.
7.6 RESET
• All to Default: This resets all settings to factory default values.
NOTE:
Be sure to keep track of the settings and what changes need to be made before
outputting power from the inverter

EG4 6000XP Specifications

General

Nominal DC Voltage	48V
Maximum DC Voltage	500V
Maximum Continuous Output Power	6000W
Frequency	60Hz
Model	EG4-6000XP
Peak Power	12000W
Protection Features	Over Voltage, Over Load, Over Temperature, Short Circuit
Cooling	Fan