EG4 6000XP User Manual

59
15. INVERTER MAINTENANCE
Electrical equipment must be properly maintained to increase longevity and consistency.
Follow the steps below to help prevent component damage/deterioration.
1. Inspect the inverter every month to confirm nothing covers the inverter heatsink. If there is
cover, shut down the inverter and clear the heat sink to restore proper cooling.
2. Inspect the inverter every 3 months to verify the operating parameters are normal, and there is
no abnormal heating or noise from any components in the system.
3. Inspect the inverter every 6 months to check for any damaged cables, accessories, or
terminals.
If unable to identify the source of any potential abnormal operations, please contact the distributor’s
technical support team for additional information.

EG4 6000XP Specifications

General

Nominal DC Voltage	48V
Maximum DC Voltage	500V
Maximum Continuous Output Power	6000W
Frequency	60Hz
Model	EG4-6000XP
Peak Power	12000W
Protection Features	Over Voltage, Over Load, Over Temperature, Short Circuit
Cooling	Fan