Device Overview
All the inverters linked to the account can be found here. Clicking a serial number will
switch the main page to show the real time data for that inverter.
8.3.5 DASHBOARD (MAINTENANCE TAB)
The "Maintenance" view is used for firmware updates and to remotely change settings
on the inverter by selecting a station and then an inverter serial number.
Distributors can manage all settings for all inverters at once with the help of the batch
setting capability supported by EG4's monitor system.
Remote Set
9. FIRMWARE UPDATES
9.1 FIRMWARE UPDATE VIA EG4 ELECTRONICS APP
When updating the firmware through the EG4 App, be sure to have
plenty of battery life on the mobile device and do not close the
application. Make sure the Wi-Fi dongle is connected securely and
correctly configured for the inverter before performing the following
steps.
Step 1: Open the EG4 Electronics App on the mobile device and select
the “DOWNLOAD FIRMWARE” button.
Step 2: Choose the correct firmware file (contact the distributor for
most up to date files) and select “DOWNLOAD” on the right side to
download the file to the mobile device.
IMPORTANT: Advanced technical knowledge is necessary to properly make changes.
End users will only be able to see the “Remote Set” tab to make changes to their
To Next Page
Loading...
Need help?
General
