EG4 6000XP User Manual

29
8.3 ONLINE MONITORING SYSTEM USER INTERFACE
The customer needs to register a monitor account in the monitor system and set a Wi-Fi
password for the Wi-Fi dongle before using the EG4 monitor system. The monitoring system
may change due to updates, so the following UI descriptions may vary from the current
pages on the site. Please contact support@eg4electronics.com to create distributor or
installer accounts. See section 10 for detailed instructions on how to access the EG4 Monitor
App, how to register an account, and how to set a Wi-Fi password.
8.3.1 DASHBOARD (MONITOR TAB)
Once the account is created and the user is logged in, the main page (Monitor tab) of the
interface will be displayed.

EG4 6000XP Specifications

General

Nominal DC Voltage	48V
Maximum DC Voltage	500V
Maximum Continuous Output Power	6000W
Frequency	60Hz
Model	EG4-6000XP
Peak Power	12000W
Protection Features	Over Voltage, Over Load, Over Temperature, Short Circuit
Cooling	Fan