To Next Page

To Previous Page

11.1.1 EXTERNAL RSD WIRING INSTRUCTIONS

The image below showcases an example diagram using a Tigo RSD Transmitter (not

included). Wire the E-Stop Switch into the RSD terminals on the master inverter, as shown

below, following the speciﬁc switch’s speciﬁcations. Please refer to the switch’s manual for

exact speciﬁcations and wiring instructions.

Table of Contents3
Technical Specifications5
Abbreviations7
Safety8
Safety Instructions8
Important Safety Notifications8
Brief Introduction10
Inverter Features10
Inverter Interface11
Installation12
Packing List12
Location Selection and Installation12
Storage Information13
Installing the Inverter14
Mounting Steps14
Connection Overview15
System Connections15
Pv Connection15
Connecting Pv to the Inverter15
String Sizing16
Pv Wiring Instructions17
Battery Connection18
Battery Cable Connection18
Lithium Battery Communications19
Ac Wiring Information20
Steps for Ac Connection20
Working with a Generator21
Generator System Connection21
Integrated Two-Wire Start/Stop21
Generator Ac Connections22
Generator Start and Stop Settings22
Off-Grid23
Off-Grid Wiring23
Paralleling Information23
Parallel Communication Connections23
Parallel Configuration24
End User Settings25
Application Setting25
Charge Setting25
Generator Charge26
Discharge Setting26
Reset26
Installer Settings27
Common Setting27
Application Setting28
Charge Setting29
Discharge Setting30
Other Setting31
Reset31
Monitor System Setup32
Wi-Fi/4G/Lan Dongle Connection32
Third-Party Rs485 Communication32
Online Monitoring System User Interface33
Dashboard (Monitor Tab)33
Dashboard (Data Tab)36
Dashboard (Configuration Tab)39
Dashboard (Overview Tab)40
Dashboard (Maintenance Tab)41
Firmware Updates41
Firmware Update Via Eg4 Electronics App41
Firmware Update Via Monitor Center (Website)42
Smartphone App Setup44
Working Modes45
Rapid Shutdown (Rsd)46
External Rsd Wiring Instructions47
Lcd Display and Settings48
Lcd Display48
Lcd Settings50
Inverter Start-Up and Shut-Down Procedure60
Start-Up60
Shut-Down60
Error/Warning Tables61
Error Definitions and Troubleshooting61
Warning Definitions and Troubleshooting62
Inverter Maintenance63

Questions and Answers:

Need help?

Do you have a question about the EG4 6000XP and is the answer not in the manual?

EG4 6000XP Specifications

General

Nominal DC Voltage	48V
Maximum DC Voltage	500V
Maximum Continuous Output Power	6000W
Frequency	60Hz
Model	EG4-6000XP
Peak Power	12000W
Protection Features	Over Voltage, Over Load, Over Temperature, Short Circuit
Cooling	Fan

Related product manuals

EG4 6000XP User Manual

Table of Contents

Questions and Answers:

EG4 6000XP Specifications

Related product manuals