Safety rules Operating manual - Fan CF-C
12 of 84 www.elektror.com 2004930 10.19/0.2
EN
2 Safety rules
The fan has been constructed and manufactured in accordance with the currently valid
technical level and recognized safety techniques. Despite this, it is possible that a risk to
persons or valuable objects occurs, because the sc
ope of an effective protective system does
not allow avoiding all possible threats. However, it is possible to prevent accidents resulting
from these risks and disruptions through exhaustive training of personnel regarding the
provisions of this operating
manual and the information contained therein. At the same time,
strict adherence to these operating manual allows you to take full advantage of the
performance and capabilities of the fan and to avoid unnecessary disturbances.
The basic condition for safe
and uninterrupted operation of the fan is full knowledge of safety
rules and applicable regulations.
Therefore, before starting the fan operation, read this section. You must also follow the
recommendations and warnings found on the relevant pages in the
text and in the following
chapters. Failure to comply with the rules and warnings may result in the manufacturer being
released from product liability.
In addition to the provisions of this operating manual, regulations, in particular safety
regulations a
nd accident prevention shall apply.
2.1 Symbols contained in the operating manual
This manual as well as signs on the fan use symbols and coloured backgrounds that require
special attention. The appearance and symbols of the operating manual are described below.
2.1.1 Information
This symbol draws attention to favourable tips, explanations and additions regarding the
fan operation.
The symbol refers to a chapter in the operating manual or other documentation / external
information.
To Next Page
Loading...