Mounting, installation and connection Operating manual - Fan CF-C
34 of 84 www.elektror.com 2004930 10.19/0.2
EN
6.2 Personal protective equipment
Hand protection
An order to wear protective gloves when performing activities in conditions of risk of
injury, such as cutting, sticking, clamping, the effect of temperature or harm
ful
Foot protection
An order to wear foot protection when performing activities in conditions of risk of falling
or cramping objects, walking on sharp objects, effects of temperature or harmful
substances.
Hearing protection
An order to
wear hearing protection when performing activities in a noise environment
up to 80 dB(A) and / or exceeding a peak noise level of 135 dB(C).
Head protection
An order to wear head protection when performing activities in conditions of risk of
falling objects or the possibility of hitting head against a hard object during normal body
movements.
6.3 Special tools, equipment and material
Products and materials which are assumed to be not a component of a typical workshop in an
industrial standard are consid
ered special tools, devices and materials. At the stage of
"Mounting, installation and connection" there is no need to use special tools, equipment and
materials.
6.4 Activities and qualifications
Table 6: Installation – Activities and qualifications
Transport, operation of crane, operation of
lift trucks
Qualified personnel authorized to drive and operate the
transport and lifting equipment used. In addition, the
unloading and lifting of components should be entrusted only
to personnel who are qualified due to training in the area of
secure fastening of components in lashing points and using
load suspension devices and slings
Mounting and mechanical installation of
the fan
Qualified personnel authorized to mechanically assemble the
fan
Electrical connections Qualified electrical engineer
Inspection, testing and receipt of
mechanical components of the fan
Qualified personnel authorized to inspect, test and receive
mechanical components of the fan
Inspection, testing and receipt of electrical
components of the fan
Qualified personnel authorized to inspect, test and receive
electrical components of the fan
Cleaning (except for live parts) Cleaning personnel
Cleaning of live components, e.g. the
interior of the control cabinet
Qualified electrical engineer
Coordination of various activities An employee authorized to give instructions
To Next Page
Loading...