Elektror CF Series - 10.2 Personal Protective Equipment; 10.3 Special Tools, Equipment and Material; 10.4 Activities and Qualifications; 10.5 Dismantling of the Fan

Operating manual - Fan CF-C Dismantling
2004930 10.19/0.2 www.elektror.com 79 of 84
EN
10.2 Personal protective equipment
Hand protection
An order to wear protective gloves when pe
rforming activities in conditions of risk of
injury, such as cutting, sticking, clamping, the effect of temperature or harmful
substances.
Foot protection
An order to wear foot protection when performing activities in conditions of risk of falling
or
cramping objects, walking on sharp objects, effects of temperature or harmful
substances.
Protective clothing
When performing activities where there is a risk of high temperature, free movement of
particles or leakage of liquid.
10.3 Special tools, equipment and material
Products and materials which are assumed to be not a component of a typical workshop in an
industrial standard are considered special tools, devices and materials. At the stage of
"Dismantling" there is no need to use special tools, equipment and materials.
10.4 Activities and qualifications
Table 27: Dismantling – Activities and qualifications
Activity Qualification
Activities related to disassembly of mechanical
components
Mechanical maintenance worker
Activities related to disassembly of electrical
components
Qualified electrical engineer
Activities related to disassembly of control and
regulatory components.
Qualified personnel who are authorized to perform
activities related to control and regulatory
components
Coordination of various activities An employee authorized to give instructions
10.5 Dismantling of the fan
The dismantling of the fan generally requires the involvement of the manufacturer or an
authorized representative. In such case, an option of fan
re-assembling and commissioning is
provided.
Only after all work related to the de-commissioning of the fan has been done, and after
approval by an authorized specialist, it is possible to start dismantling.
If it is planned to dismantle the fan at the
time of its transfer and re-positioning in another
destination, the necessary actions may be performed only by qualified personnel of the
manufacturer.