Operating manual - Fan CF-C Mounting, installation and connection
2004930 10.19/0.2 www.elektror.com 33 of 84
EN
The fan requires storage in a transport packaging in a dry place
with a controlled temperature in the temperature range of +5 °C to
+45°C.
The fan requires protection against mechanical damage, UV
radiation and shocks.
Metal surfaces without a coating should be protected with a
preservative for ferrous and non-ferrous metals.
− In case of longer storage, turn the impeller manually every 2 weeks.
In the event of corrosion or damage resulting from improper storage, e.g. keeping the fan
in a damp room or in inappropriate conditions, the manufacturer does not take over the
guara
ntee.
6 Mounting, installation and connection
The chapter presents only the main content; it should be treated as a source of basic
information.
6.1 Safety rules
Ambient temperature of the fan
Exceeding the permissible ambient temperature and damage to the fan cooling can lead to
serious material and personal damage.
Before mounting, check the ambient conditions at the place of installation, e.g. temperature
and atmosphere properties.
The air-cooled electric motor should not stand directly against the wall.
Please note that the cooling capacity depends on the difference between the temperatures
of the cooling air and the medium. Make sure that the impeller can transport sufficient amounts
of cool air to the fan.
Failure to take into account the load-bearing capacity of the ground can lead to substantial
personal and material damage.
When unloading, take into account the load
-bearing capacity (statics) of the ground or the
The use of improper means of transport can lead to personal and material damage of
considerable value.
When using means of transport, account should be taken of applicable regulations, e.g.
accident prevention rules "Cranes" (DGUV regulation 52), "Lift trucks" (DGUV regulation 6
8)
and "Vehicles" (DGUV regulation 70).
To Next Page
Loading...