EasyManua.ls Logo

Elektror CF Series - Overview of Residual Risk; Basic Safety Rules; Table 3: Overview of Residual Risk

Default Icon
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operating manual - Fan CF-C Safety rules
2004930 10.19/0.2 www.elektror.com 19 of 84
EN
2.4 Overview of residual risk
Table 3 shows the residual risk of the fan.
Table 3: Overview of residual risk
Cause of risk Risk situation Actions
Contact with electrical
components during
troubleshooting
Directly touching the active
elements (electric motor)
Necessary training of personnel in dealing with live
components.
Improper visibility All activities at the fan Lighting system, provided by the user
Gripping, winding Contact with rotating parts
of the fan
Preparation of work instruction by the user
Overload, fatigue,
stress
All activities at the fan Preparation of work instruction by the user
Human error All activities at the fan Preparation of work instruction by the user
Operating error All activities at the fan Preparation of work instruction by the user
Security bypass All activities at the fan Preparation of work instruction by the user
Insufficient information
from the user
All activities at the fan Preparation of work instruction by the user
Crushing, clamping Operation of machinery
components
The order to wear personal protective equipment
Burn, freezing Contact with hot surfaces The order to wear personal protective equipment
Preparation of work instruction by the user
Constant noises Fan operation The order to wear personal protective equipment
Use, application of
hazardous materials
All activities at the fan The order to wear personal protective equipment
Inhalation of dangerous
liquids, gases, aerosols,
mists of vapours and
dust (hazardous
materials)
Improper use of cleaning
products
Preparation of work instruction
Improper use of lubricants Preparation of work instruction
Chemical reactions Improper use of cleaning
products
Preparation of work instruction
2.5 Basic safety rules
The basic safety rules are a condition for the safe use of the fan. It is worth using the
basic safety rules to train and instruct the personnel. Communicating these rules will
allow
for safe conduct of personnel and will enable transfer of responsibility.
Use in a manner consistent with the intended use
Disregarding the rules of use in a manner consistent with the intended use may result in
significant personal and materia
l damage.
It is recommended to use the fan only as intended, according to the content of chapter
"Use in a manner consistent with the intended use".
Qualified and authorized personnel
Performing any activities on the fan by unqualified and unauthorized personnel may result in
significant personal and material damage.
All activities performed on the fan should be carried out by qualified and authorized
personnel.

Table of Contents