Safety rules Operating manual - Fan CF-C
14 of 84 www.elektror.com 2004930 10.19/0.2
EN
2.1.3 Safety signs
2.1.3.1 Warning signs
Warning signs indicate dangerous situations.
Warning against risk
The symbol warns against a risk for which there is no standard warning sign in the form
of a pictogram. If the threat is not vi
sible immediately, the next tab with the explanation
is located under the sign.
Warning against electricity
The symbol warns against a risk from electricity. Warning symbol, placed among others
on the terminal boxes of electric motors.
Warning against hot surface
The symbol warns against the risk of a hot surface. Warning symbol, placed among
others on the housing or the bearing of the fan.
Warning against suspended load
The symbol warns against the danger caused by suspended loads (e.g. transpo
rt of
heavy loads by cranes and gantries).
Warning against automatic start
The symbol warns against mechanical risk (e.g. gripping, drawing in or getting caught
by the impeller) and of automatic start.
Warning against being drawn inside the machine
The symbol warns against mechanical risk
– pulling in while using consumables.
Warning against hand injury
The symbol warns against mechanical risk
– crushing or cutting while using
Warning against explosion
The symbol warns against r
isks caused by sparks or hot surfaces. Warning symbol,
placed among others on electrical components.
Warning against the emission of hot or dangerous gases
The symbol warns against risks due to hot or dangerous gases escaping from hub or flange
seals.
Warning against cutting off
The symbol warns against mechanical risk
– cutting off when opening the inspection
2.1.3.2 Prohibition signs
No unauthorized access
The prohibition sign indicates an area to which access is only allowed to authorized
pers
ons.
To Next Page
Loading...