Operation of the fan Operating manual - Fan CF-C
72 of 84 www.elektror.com 2004930 10.19/0.2
EN
Before performing the repair:
−
Before removing screw connections:
Protect the disassembled elements from falling.
Before removing the elements:
Protect the fan from tipping over.
Before removing the chains / ropes:
Relax the chains / ropes.
Secure the chain / rope against unwinding.
First, connect / disconnect previously disconnected electrical components.
Then disconnect the elements of the hydraulic / pneumatic system, after depressurization.
Remember about the weight of the removable elements. If necessary, use appropriate
devices, e.g. cranes or forklifts.
Please refer to the specific manufacturer's specifications for bolted connections (tightening
torques, bolt retaining, etc.).
After performing the repair:
−
The fan should be started only after it has been approved by an authorized person.
− Replaceable parts should be disposed of in a manner consistent with the regulations.
To Next Page
Loading...