Elma Elmasolvex VA - Page 41

Daily cleaning operation
© Elma Schmidbauer GmbH BA_Elmasolvex_VA_EN_Vers.05.2018
41
Fig. 6.4.2 Display Program is aborted
The end of the cleaning program is notified by an ascending
tone audible signal sequence.
The corresponding indication is shown on the display.
Press (Fig. 6.4.3) to confirm this notification and switch off
the signal tone.
The display for selection of the cleaning program (Fig. 6.3.1) is
shown on the display again.
Fig. 6.4.3 Display Program finished
Now you can open the cover of the cleaning chamber and
remove the basket holder.
Depending on the program duration, the cleaning chamber
interior wall is still hot (<60 °C) and the basket holder is still
warm (<45 °C) immediately after the program end.
If necessary let the basket holder cool down for some time in
the cleaning chamber.
Cleaning program end
CAUTION