Elma Elmasolvex VA - 17.3 Creating a New Cleaning Program

Appendix 4: Expert Mode
© Elma Schmidbauer GmbH BA_Elmasolvex_VA_EN_Vers.05.2018
129
17.3 Creating a new cleaning program
Proceed to select on of the options on the Create/Change
Programs display.
Fig. 7.2.1.1 Create/Change Programs (standard mode) display
Press the button to activate expert mode.
Fig. 7.2.1.1b Create/Change Programs (expert mode) display
Use / in the selection list to select Create New Program,
and confirm with (Fig. 7.2.1.1b)
The Enter Program Name (Fig. 7.2.1.2) display appears.
Navigate within any line of the character selection using
/ .
Use / to navigate between the 3 lines.
Use the
button to delete any character that you entered.
Press to apply the selected character.
To save the entered program name and continue to specify
program parameters, press .
Naming the new
program