Daily cleaning operation
BA_Elmasolvex_VA_EN_Vers.05.2018 © Elma Schmidbauer GmbH
6.4 Interrupting / aborting cleaning program
Risk of injury from fast rotating cleaning basket!
Never open the cover of the cleaning chamber during the
cleaning process!
Never reach into the rotating cleaning basket!
If required, cancel the cleaning program in a controlled way.
Press the Start / Pause operating button (Fig. 3.9.1.C) if the
cleaning program has to be interrupted for any reason.
The display with the pause information (Fig. 6.4.1) is shown on
the display.
Press the Start / Pause operating button (Fig. 3.9.1.C) if you
would like to continue with the cleaning program.
Fig. 6.4.1 Display Pause
If you would like to definitively abort the cleaning program, there
is a selection option whether a rinsing process should still be
performed or not.
Press Abort process without rinsing or Abort process after
rinsing (Fig. 6.4.1).
Information about the abortion of the cleaning program
(Fig. 6.4.2) is displayed during the abortion process.
Interruption of the
cleaning program
Abortion of the
cleaning program
To Next Page
Loading...
