Settings
BA_Elmasolvex_VA_EN_Vers.05.2018 © Elma Schmidbauer GmbH
First, the display with the program parameters from the process
step Clean (Fig. 7.2.1.3) is shown.
The already existing program parameters of the cleaning
program to be modified can now be adjusted (overwritten)
individually.
7.2.4 Delete cleaning program
The predefined cleaning programs stored in the cleaning
machine at the factory cannot be deleted.
Programs you create yourself can be deleted at any time.
On the display Modify / Create Programs (Fig. 7.2.1.1), select
Delete existing program using / and confirm with .
Using / , select the cleaning program which should be
deleted (in the example Standard_0) (Fig. 7.2.4.1).
Confirm the selection with .
Fig. 7.2.4.1 Display Delete program
A display with the query whether the selected program should
really be deleted is shown.
Press to confirm the "delete program" command.
Press if the command should be discarded.
For both actions, the display Delete program is reached
afterwards. It is possible to delete further programs or return to
the Program Select List display .
Editing program
parameters
Selecting program to
be deleted
To Next Page
Loading...
