Initial commissioning
BA_Elmasolvex_VA_EN_Vers.05.2018 © Elma Schmidbauer GmbH
5 Initial commissioning
5.1 Connecting cleaning machine to mains power supply
The connection conditions must match the information on the
rating plate.
Connect the mains cable (included in the scope of delivery).
The cleaning machine must only be connected to a grounded
power socket.
The mains plug must only be connected to an easily accessible
power socket as it is considered as a disconnector!
5.2 Switching on cleaning machine
Switch on the cleaning machine at the main switch
(Fig. 3.7.1.B).
The internal fans are started (fan noise audible).
5.3 Selecting language in the display
A language must initially be selected when first switching on (for
handling see Chapter 3.10). The display does not change to the
next step until then.
The language in the display set at the factory is German.
Confirm or change the language by pressing the appropriate
operating button.
The selected language is shown on the display (Fig. 5.3.1.A).
Fig. 5.3.1 Display user language
The display now automatically changes to the interrogation of
the filling of the media tanks (Fig. 6.1.1 Chapter 6.1).
A
To Next Page
Loading...