Elma Elmasolvex VA - 7 Settings; 7.1 Cleaning Machine Settings

Settings
42
BA_Elmasolvex_VA_EN_Vers.05.2018 © Elma Schmidbauer GmbH
7 Settings
If an Administrator PIN has been stored by the user
(Chapter 7.1.2), a request for the Admin PIN is shown on the
display. Entries / changes for the cleaning machine settings and
cleaning programs are not possible without input of the valid
Administrator PIN.
7.1 Cleaning machine Settings
It is possible to make various cleaning machine and program
settings. These options are described in the following chapters.
The procedure for the operating steps starts in each case from
the display Program Select List (Fig. 7.1.1) and then Unit
Settings (Fig. 7.1.2).
Fig. 7.1.1 Display Program Select List
Press in the Program Selection display to open the Machine
Settings display.
Fig. 7.1.2 Display Unit Settings