CHAPTER 2 — INSTALLATION
In this Chapter you will find the information and instructions that
the Installation Technician needs, to mount and connect the
ElNet
Energy & Powermeter
• During operation, hazardous voltages are present
in connecting cables and terminal blocks.
• Fully qualified personnel must do all work. Failure
to follow this rule may result in serious or even
fatal injury to personnel and/or damage to
equipment.
• Refer to Section 1.3 Safety information before
carrying out any installation.
• Read this manual thoroughly and make sure you
understand the contents before connecting the
ElNet
Energy & Powermeter to any power
source.
WARNING!
To Next Page
Loading...
