1.3 Safety Information
The purpose of this manual is to help you. Please read the
instructions carefully before performing any installation and note
any precautions.
• Ensure that all incoming AC power and other power
sources are turned off before performing any work on
the
ElNet
Energy & Powermeter
.
Failure to do so
may result in serious or even fatal injury and/or
equipment damage.
• If the
ElNet
Energy & Powermeter is damaged in
any way do NOT connect it to any power source.
• To prevent a potential fire or shock hazard, never expose
the
ElNet
Energy & Powermeter to rain or
moisture.
• Keep the surrounding area free of dirt and clutter
especially metal objects. Good housekeeping pays.
• Inspect the cables periodically for cracks, kinks or any
other signs of wear
• Keep children away.
• Do not pull the cords.
• Users should stay alert and not approach the rear of the
ElNet
Energy & Powermeter while tired or under
the influence of alcohol, medicines or any other
chemical substance that would tend to make a person
drowsy.
• Do not wear loose clothing or dangling jewelry.
• Above all use common sense at all times.
WARNING
To Next Page
Loading...
