32
CHAPTER 4 — NECESSARY ElNet SETTINGS
In this chapter you will
find instructions to set the minimum settings
that are necessary to allow the ElNet Energy & Powermeter to
function
properly.
• The selection, installation and settings of the
Current Transformer are the most vital and
fundamental actions required to ensure the
accuracy of the
ElNet
Energy &
Powermeter.
• It is essential to know the ratio of the Current
Transformer being installed into the system in
order to set the parameter for the Current
Transformer correctly.
• All three main current Lines MUST have
Current Transformers of the same ratio
installed onto them.
WARNING!
To Next Page
