ELTEX MES3108 - Page 125

MES3000 Ethernet switch series 125
no ip igmp snooping vlan
vlan_id cos
Zero the CoS value for outbound IGMP messages going to mrouter
port in the selected VLAN.
ip igmp snooping vlan vlan_id
mrouter learn pim-dvmrp
vlan_id: (1..4094);
-/enabled
Enable automatic port identification with connected multicast
routers for the current VLAN group.
no ip igmp snooping vlan
vlan_id mrouter learn
pimdvmrp
Disable automatic port identification with connected multicast
routers for the current VLAN group.
ip igmp snooping vlan vlan_id
mrouter interface
{gigabitethernet gi_port |
tengigabitethernet te_port |
port-channel group}
vlan_id: (1..4094)
gi_port: (1..8/0/1..24);
te_port: (1..8/0/1..4);
group: (1..24)
Define the port with connected multicast router for the selected
VLAN.
no ip igmp snooping vlan
vlan_id mrouter interface
{gigabitethernet gi_port |
tengigabitethernet te_port |
port-channel group}
Multicast router is not connected to the port.
ip igmp snooping vlan vlan_id
forbidden mrouter interface
{gigabitethernet gi_port |
tengigabitethernet te_port |
port-channel group}
vlan_id: (1..4094)
gi_port: (1..8/0/1..24);
te_port: (1..8/0/1..4);
group: (1..24)
Do not identify the port (static, dynamic) as a port with connected
multicast router.
no ip igmp snooping vlan
vlan_id forbidden mrouter
interface {gigabitethernet
gi_port | tengigabitethernet
te_port | port-channel group}
Identify the port as a port with connected multicast router.
ip igmp snooping vlan vlan_id
replace source-ip ip_address
vlan_id: (1..4094)
Replaces source IP address with specified IP address in all IGMP
report packets of the specified VLAN.
no ip igmp snooping vlan
vlan_id replace source-ip
Disables replacement of source IP address with specified IP
address in all IGMP report packets of the specified VLAN.
ip igmp snooping map cpe vlan
vlan_id multicast-tv vlan
vlan_id
vlan_id: (1..4094)
Add the match between user VLAN (CPE-VLAN) and TV VLAN
(multicast-tv-vlan). If IGMP message comes to a port with CPE-vlan
tag and the match 'CPE-vlan – multicast-tv-vlan' exists, IGMP
message will be associated with TV VLAN.
no ip igmp snooping map cpe
vlan vlan_id
Remove the match between user VLAN and TV VLAN.
ip igmp snooping vlan vlan_id
querier
vlan_id: (1..4094);
-/disabled
Enable igmp-query generation by the switch in the current VLAN.
no ip igmp snooping vlan
vlan_id querier
Disable igmp-query generation by the switch in the current VLAN.
ip igmp snooping vlan vlan_id
querier version {2 | 3}
-/IGMPv3
Set IGMP version for IGMP query generation.
no ip igmp snooping vlan
vlan_id querier version
Restore the default value.
ip igmp snooping vlan vlan_id
querier address ip_address
vlan_id: (1..4094)
Define the source IP address for IGMP querier.
no ip igmp snooping vlan
vlan_id querier address
Restore the default value. By default, if the IP address is
configured for VLAN, it will be used as IGMP Snooping Querier
source address.
ip igmp snooping vlan vlan_id
immediate-leave
vlan_id:
(1..4094)/disabled
Enable IGMP Snooping Immediate-Leave process for the current
VLAN. The port will be immediately deleted from the IGMP group
after IGMP leave message is received.
ip igmp snooping vlan vlan_id
immediate-leave host-based
Enable IGMP Snooping Immediate-Leave process for the current
VLAN. The port will be immediately deleted from the IGMP group
after IGMP leave message is received, if there are no more clients
that require this group.
no ip igmp snooping vlan
vlan_id immediate-leave
Disable IGMP Snooping Immediate-Leave process for the current
VLAN.