ELTEX MES3108 - Page 173

MES3000 Ethernet switch series 173
no dot1x max-req
Restore the default value.
dot1x timeout supp-
timeout period
1..65535/30 seconds
Specify the period between the recurrent request transfers to EAP
client.
no dot1x timeout supp-
timeout
Restore the default value.
dot1x timeout server-
timeout period
1..65535/30 seconds
Specify the period, during which the switch will wait for response
from authentication server.
no dot1x timeout server-
timeout
Restore the default value.
Privileged EXEC mode commands
Command line request in Privileged EXEC mode appears as follows:
console#
Table 5.202 —Privileged EXEC mode commands
Command
Value
Action
dot1x re-authenticate
[gigabitethernet gi_port |
tengigabitethernet te_port]
gi_port: (1..8/0/1..24);
te_port: (1..8/0/1..4)
Enable manual re-authentication of the port specified in the
command, or all ports supporting 802.1X.
show dot1x interface
{gigabitethernet gi_port |
tengigabitethernet te_port}
gi_port: (1..8/0/1..24);
te_port: (1..8/0/1..4)
Show IEEE 802.1X state for the switch or selected interface.
show dot1x users
[username username]
(1..160) characters
Show active authenticated IEEE 802.1X switch users.
show dot1x statistics
interface {gigabitethernet
gi_port |
tengigabitethernet te_port}
gi_port: (1..8/0/1..24);
te_port: (1..8/0/1..4)
Show IEEE 802.1X statistics for the selected interface.
Example execution of commands
 Enable IEEE 802.1X authentication mode on the switch. Use RADIUS server for client
authentication checks on IEEE 802.1X interfaces. Use IEEE 802.1x authentication mode on the
Ethernet interface 18.
console# configure
console(config)# dot1x system-auth-control
console(config)# aaa authentication dot1x default radius
console(config)# interface gigabitethernet 1/0/18
console(config-if)# dot1x port-control auto
 Show IEEE 802.1X state for the switch, for the Ethernet interface 12.
console# show dot1x
802.1x is disabled
Admin Oper Reauth Reauth Username
Port Mode Mode Control Period
-------- ------------------ ------------- -------- ---------- -----------------
gi0/1 Force Authorized Authorized* Disabled 3600 n/a
gi0/2 Force Authorized Authorized* Disabled 3600 n/a
gi0/3 Force Authorized Authorized* Disabled 3600 n/a
gi0/4 Force Authorized Authorized* Enabled 3600 n/a
gi0/5 Force Authorized Authorized* Disabled 3600 n/a
…
gi0/10 Force Authorized Authorized* Disabled 3600 n/a
gi0/11 Force Authorized Authorized Disabled 3600 n/a