ELTEX MES3108 - Page 174

174 MES3000 Ethernet switch series
gi0/12 Force Authorized Authorized* Disabled 3600 n/a
gi0/13 Force Authorized Authorized* Disabled 3600 n/a
gi0/14 Force Authorized Authorized* Disabled 3600 n/a
gi0/15 Force Authorized Authorized* Disabled 3600 n/a
gi0/16 Force Authorized Authorized* Disabled 3600 n/a
More: <space>, Quit: q, One line: <return>
console# show dot1x interface gigabitethernet 1/0/12
802.1x is disabled
Admin Oper Reauth Reauth Username
Port Mode Mode Control Period
-------- ------------------ ------------- -------- ---------- -----------------
gi0/12 Force Authorized Authorized* Disabled 3600 n/a
* Port is down or not present
Quiet period: 60 Seconds
Tx period: 30 Seconds
Max req: 2
Supplicant timeout: 30 Seconds
Server timeout: 30 Seconds
Session Time (HH:MM:SS): 00:00:00
MAC Address:
Authentication Method: Remote
Termination Cause: Port re-initialize
Authenticator State Machine
State: INITIALIZE
Backend State Machine
State: INITIALIZE
Authentication success: 0
Authentication fails: 0
Table 5.203 Description of command execution results
Parameter
Description
Port
Port number.
Admin mode
IEEE 802.1X authentication mode: Force-auth, Force-unauth, Auto.
Oper mode
Port operation mode: Authorized, Unauthorized, Down.
Reauth Control
Re-authentication control.
Reauth Period
The period between the recurring authentication checks.
Username
Username for IEEE 802.1X usage. If the port is authorized, the current user name is
shown. If the port is not authorized, the last successfully authorized user name for the
port is shown.
Quiet period
The period during which the switch will remain in the silent state after unsuccessful
authentication.
Tx period
The period during which the switch will wait for the response to the request or EAP
identification from the client before re-sending the request.
Max req
Maximum number of attempts for EAP protocol request transfer to client before the new
authentication process execution.
Supplicant timeout
The period between the recurrent EAP request transfers to client.
Server timeout
The period during which the switch will wait for response from authentication server.
Session Time
The amount of time that the user is connected to the device.
Mac address
User MAC address.