235
Note! Max 1-wire network length is 100 m, you need 3-wires: +5V, 1-Wire, GND. It can take up
to 0.5 seconds for each sensor reading. We recommend to connect up to 30 sensors.
Further, in the latest firmware of LogicMachine there are features like increased polling time of
1-wire objects, implemented keepalive object which indicates of error if there was lost
connection with at least one of 1-wire device. Also in the configuration menu on LogicMachine
you can see pre-configured 1-wire devices and newly found ones in separate lists.
To Next Page
Loading...
Need help?
General
