Emerson EZMotion - SM-Universal Encoder Plus Module View

58 EZMotion User/Programming Guide
www.controltechniques.com Revision: A8
populated in that specific slot, see Figure 66.
Figure 66: Slot # View (SM-I/O Plus Module)
8.3.4 SM-Universal Encoder Plus Module View
If Universal Encoder Plus is selected in the Slot# Module list box, the remainder of the view should have configuration parameters to
define what type of encoder is being used and to define the encoder properties. The hierarchy tree automatically updates to show
that a SM-Universal Encoder Plus module is populated in that specific slot, see Figure 67.
Figure 67: Slot # View (SM-Encoder Plus Module)