Emerson EZMotion User Manual

Safety
Information
Introduction Installation
PowerTools
Pro
Software
Communications
How
Motion
Works
How I/O
Works
Configuring
an
Application
Programming
Starting and
Stopping
Motion
Starting and
Stopping
Programs
Parameter
Descriptions
Drive
Parameters
Used by
EZMotion
Diagnostics Glossary Index
EZMotion User/Programming Guide 11
Revision A8 www.controltechniques.com
4 PowerTools Pro Software
4.1 Introduction
PowerTools Pro is the software used to configure hardware type, setup parameters, I/O functionality, motion profiles, user
programs, and networks for the SM-EZMotion module. PowerTools Pro software operates on a PC running Windows® 98,
2000, 2003, 2008, XP (32-bit) with SP2 and Vista (32-bit) and can also be used as a diagnostic tool and troubleshooting
assistance.
4.2 Installing PowerTools Pro
4.2.1 From the SM-EZMotion CD
PowerTools Pro can be installed directly from the SM-EZMotion CD that ships with every SM-EZMotion module. To install
PowerTools Pro, insert the SM-EZMotion CD into the CD-ROM drive of your PC. The SM-EZMotion CD will auto-launch on
your PC (if not, use Windows Explorer to find the Launch.exe file on the CD drive, double click). From the SM-EZMotion CD
Main Menu, click on the PowerTools Pro Software button. Figure 6 shows the SM-EZMotion software screen.
Figure 6: SM-EZMotion Software Screen
Once the button is clicked the installation will begin. Follow the installation instructions to complete the software installation.
4.2.2 From the Web
PowerTools Pro can be downloaded from the Control Techniques website at the following address: www.emersonct.com.
Figure 7: Control Techniques Americas’ Website

Emerson EZMotion Specifications

General

Brand	Emerson
Model	EZMotion
Category	Control Unit
Language	English