Emerson EZMotion User Manual

Safety
Information
Introduction Installation
PowerTools
Pro Software
Communications
How
Motion
Works
How I/O
Works
Configuring
an
Application
Programming
Starting and
Stopping
Motion
Starting and
Stopping
Programs
Parameter
Descriptions
Drive
Parameters
Used by
EZMotion
Diagnostics Glossary Index
EZMotion User/Programming Guide 91
Revision A8 www.controltechniques.com
Resume process.
Figure 91: Distance Recovery View
Gear and Camming Distance Recovery Group
Enable Distance Recovery Check Box
The Enable Distance Recovery Check box (DistanceRecovery.DistanceRecoveryEnable) is clear (disabled) by default. Select
the check box to enable the additive distance recovery index feature.
Velocity
This parameter (DistanceRecovery. Vel) is the velocity limit of the distance recovery index in user units.
Acceleration
Acceleration (DistanceRecovery. Accel) is acceleration rate for the distance recovery index in user units.
Deceleration
This (DistanceRecovery. Decel) is the deceleration rate for the distance recovery index in user units.
8.4.12 Tuning View
The Tuning view contains all the parameters that are adjusted to properly tune the motor/drive system. Figure 92 shows an
example of the Tuning View.
Figure 92: Tuning View

Emerson EZMotion Specifications

General

Brand	Emerson
Model	EZMotion
Category	Control Unit
Language	English