Emerson Rosemount 5300 Series - Page 220

7.9.12 Enter service mode in Rosemount Radar Master
Service functions for advanced users are available in Rosemount Radar Master. All options
in the Service menu are enabled when entering the service mode.
Procedure
1. Select Service → Enter Service Mode.
2. Type the password and select Submit.
The default password is "admin".
7.9.13
Change password for the service mode
To change the password for enabling all options in the Service menu:
Procedure
1. Select Service → Change Password.
2. Type your current password.
3. Type a new password.
7.9.14
View input registers
Measured data is continuously stored in the input registers. By viewing the contents of the
input registers, advanced users can check that the transmitter works properly.
Service and troubleshooting Reference Manual
April 2019 00809-0100-4530
220 Rosemount 5300 Level Transmitter