Emerson Rosemount 5400 Series - Page 288

276
Reference Manual
00809-0100-4026, Rev HA
Appendix H: Resource block
November 2014
Resource Block
FB_OPTIONS 45 0x00000000
(0x00000000)
Indicates which function block licensing options are
enabled.
DIAG_OPTIONS 46 0x00000000
(0x00000000)
Indicates which diagnostics licensing options are
enabled.
MISC_OPTIONS 47 0x00000000
(0x00000000)
Indicates which miscellaneous licensing options are
enabled.
RB_SFTWR_REV_MAJOR 48 3 Major revision of software that the resource block was
created with.
RB_SFTWR_REV_MINOR 49 0 Minor revision of software that the resource block was
created with.
RB_SFTWR_REV_BUILD 50 33 Build of software that the resource block was created
with.
RB_SFTWR_REV_ALL 51 3-00-033 - Mon Apr 18
16:47:05 2011 by
chadwar
The string will contain the following fields:
Major rev: 1-3 characters, decimal number 0-255
Minor rev: 1-3 characters, decimal number 0-255
Build rev: 1-5 characters, decimal number 0-255
Time of build: 8 characters, xx:xx:xx, military time
Day of week of build: 3 characters, Sun, Mon,...
Month of build: 3 characters, Jan, Feb.
Day of month of build: 1-2 characters, decimal number
1-31
Year of build: 4 characters, decimal
Builder: 7 characters, login name of builder
hardware_rev 52 6 Hardware revision of the hardware that has the
resource block in it.
output_board_sn 53 Output board serial number.
FINAL_ASSY_NUM 54 0 The same final assembly number placed on the neck
label.
detailed_status 55 0x00000000
(0x00000000)
Indicates the state of the transmitter. See Resource
Block detailed status codes.
summary_status 56 0x01(No repair needed) An enumerated value of repair analysis.
message_date 57 01/01/84 00:00:00 Date associated with the MESSAGE_TEXT parameter.
message_text 58 Used to indicate changes made by the user to the
device's installation, configuration,
or calibration.
SELF_TEST 59 0x01(No self test) Instructs resource block to perform self-test. Tests are
device specific.
define_write_lock 60 0x01(Everything locked) Allows the operator to select how WRITE_LOCK
behaves. The initial value is “lock everything”. If the
value is set to “lock only physical device”, then the
resource and transducer blocks of the device will be
locked but changes to function blocks will be allowed.
save_config_now 61 0x01(No save) Allows the user to optionally save all non-volatile
information immediately.
save_config_blocks 62 0 Number of EEPROM blocks that have been modified
since last burn. This value will count down to zero
when the configuration is saved.
start_with_defaults 63 0x01(No NV defaults) 0 = Uninitialized
1 = do not power-up with NV defaults
2 = power-up with default node address
3 = power-up with default pd_tag and node address
4 = power-up with default data for the entire
communications stack (no application data)
simulate_IO 64 0x01(Jumper off) Status of simulate switch.
security_IO 65 0x01(Jumper off) Status of security switch.
Parameter
Index
number
Default value Description