4-8 • Site Supervisor Controller User Guide 2.0 026-1800 Rev 3 02-AUG-2016
Lighting Control Example
Under Lighting control, choose from the available
options and touch the scroll bar arrows to page up and
down:
For overriding the circuit, select the desired lighting
application, (in this example, LIGHT_Name_2 is chosen)
Enable the override and set the override time for
LIGHT_Name_2.
Manual override information for LIGHT_Name_2
displays in left side of the screen.
HVAC Control Example
Touch the HVAC icon to view, edit, or override HVAC
information.
HVAC_Name_1 Cooling information.
Set the heating and cooling setpoint by using the up
and down arrows. In this example, the cooling setpoint has
been set to 25°C.
Alarms
Scheduling
System Configuration
Figure 4-14
- Lighting Control Applications and Status
Figure 4-15 - Lighting Control Override Information
Table 4-2 - Site Supervisor Display Icons and Definitions
Figure 4-16 - HVAC Applications and Status Information
Figure 4-17 - HVAC Status Information
To Next Page
Loading...
